Abstract. This specification covers aluminum and aluminum-alloy seamless pipe and seamless extruded tube. The pipe and tube shall be produced from hollow extrusion ingot (cast in hollow form, or drilled, or pierced from solid ingot) and shall be extruded by use of the die and mandrel method.
1. Scope. 1.1 This specification covers aluminum-alloy extruded structural pipe and tube in those selected alloys shown in Table 1 and tempers shown in Table 2, and in those standard sizes shown in Tables 3-5, as well as in other nonstandard sizes as agreed upon between the purchaser and supplier.
More ASTM Standard 5082 Aluminum Alloy Tube Seamless Pipe images
1.1 This speciﬁcation2 covers aluminum and aluminum–al-loy seamless pipe in the alloys (Note 1) and tempers shown in Table 1 [Table 2] and extruded round seamless tube in the alloys and tempers shown in Table 3 [Table 4] intended for pressure applications. The standard sizes for seamless pipe are listed in Table 16.7 of ANSI H35.2 and H35.2M.
ASTM A335 / A335M Seamless Alloy Pipes P11, P12, P22, P91 Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service. ASTM A335 / A 335M, ASME SA335 P11, P12, P22, P91 is the standard applicable to seamless ferritic alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes.
1.1 This specification 2 covers aluminum and aluminum–alloy seamless pipe in the alloys (Note 1) and tempers shown in Table 1 [Table 2] and seamless extruded round tube in the alloys and tempers shown in Table 3 [Table 4] intended for pressure applications. The standard sizes for seamless pipe are listed in Table 16.7 of ANSI H35.2 and H35.2(M).
ASTM A106/A 106M covers several grades of carbon and alloy steel seamless pipe ASTM A106/A 106M covers both seamless hot-finished and cold-finished pipe in sizes up to and including NPS 1/8 TO NPS 48(DN6 to DN1200) outside diameter for round tubes with wall thicknesses as required.
We have worldwide Distributor network to supply ASTM B221 Aluminum Alloy Pipes and Tubes. We stock large inventory of ASME SB221 Aluminum Alloy Seamless Tube, Aluminum Welded Piping and Tubing in India. Contact Ashapura Steel today for a best offer & competitive quotation Of Aluminum Alloy Pipe and Tube Call : +91-937075 06141
Withdrawn Rationale: This specification covers seamless pipe and seamless extruded tube in the aluminum and aluminum alloys and tempers. Formerly under the jurisdiction of Committee B07 on Light Metals and Alloys, this specification was withdrawn in July 2017 and replaced by Specification B241/B241M for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube.
1.1 This specification covers only factory-made wrought aluminum and aluminum-alloy welding fittings in contrast to field-made fittings. The term “welding fittings” applies to butt-welding or socket-end parts, such as 45° elbows, 180° return bends, 90° short radius elbows, and other types made to the dimensional standards specified by ASME B16.9 and B16.11.
ASTM B483 / B483M-13e1, Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications, ASTM International, West Conshohocken, PA, 2013, www.astm.org